Precise and Accurate Mass-independent Chromium Isotope Measurement by Total Evaporation Mode on Thermal Ionization Mass Spectrometry (TE-TIMS) at 200 ng Level
Author:
Affiliation:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
    Abstract:

    Mass-independent chromium (Cr) isotope ratios measurements have been widely used in dating early solar system events and tracing the genetic relationships between different solar system, as well as terrestrial materials. Current analytical techniques need relatively large sample sizes, and this limits the application of Cr isotopes on precious mission return samples and some Cr-poor samples (e.g., BCR-2 with Cr contents of ~15 ppm). This paper reports a novel analytical method for mass-independent Cr isotopic ratios measurements using a Thermal Ionization Mass Spectrometer (TIMS) operated in total evaporation (TE) mode. A three-step cation column (AG 50W-X12 resin, 200?400 mesh) chemistry is used to purify Cr in various samples, including chondrites, basalts and peridotites, and the Cr yield is better than 92%. Residual organics from column resins is detrimental to Cr ionization on filaments, we demonstrate that this can be effectively removed by treating samples with H2O2 at 40 OC on hotplate. Single Cr measurements on rhenium filaments consume 15 to 20 ng of Cr and sustain 52Cr of ~10V for 10 to 20 minutes. Generally, for one sample of 200 ng Cr, 10?15 ng repeated measurements can be made and 2-standard error precisions of ~ 0.05 and ~ 0.10 for ε53Cr and ε54Cr*, respectively can be achieved. The reproducibility (the 2-standard deviation) for ε53Cr and ε54Cr is 0.05 and 0.07, respectively, tested by multiple measurements for DTS-2b (USGS dunite) and NWA 7734 (ordinary chondrite). Concentration and doping test (mainly for Fe) have also been conducted. These tests show that the Fe/Cr must be < 5 % and the measured 56Fe/52Cr<1 ‰ in order to achieve accurate ε54Cr. Finally, the ε53Cr and ε54Cr values measured by normal method on TIMS are systematically higher than those measured by total evaporation method on TIMS, which is potentially caused by non-kinetic mass-dependent fractionation during Cr evaporation and ionization on TIMS. The TE method could reduce this effect that may cause inaccurate mass-independent Cr isotope data on TIMS.

    Reference
    Related
    Cited by
Get Citation

Li-Juan Xu, Ke Zhu*, Qian-Ru Man, Jamie Lewis, Hai-Bo Ma, Sheng-Ao Liu. Precise and Accurate Mass-independent Chromium Isotope Measurement by Total Evaporation Mode on Thermal Ionization Mass Spectrometry (TE-TIMS) at 200 ng Level[J]. Atomic Spectroscopy,2023,44(3):142-152.

Copy
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:
  • Revised:
  • Adopted:
  • Online: May 26,2023
  • Published:
Copyright © 2024 Atomic Spectroscopy Press Ltd All rights reserved
Supported by:Beijing E-Tiller Technology Development Co., Ltd.